LBL Lighting Round MO Chandelier with Transformer - Manual (Page 2)

2
#8-32 SCREW
3 Feed the low-voltage transformer wires through the center of
the backplate.
Mount the backplate to the electrical box with the two #8-32
screws provided.
1C
4
5
5
4
3
BACKPLATE
Attach the low-voltage wires to each dome cover wire with
the wire nuts provided.
Use the universal round crossbar provided if the
backplate holes do not line up with the holes in
the electrical box.
7 Slip the stud in the backplate through the hole in the dome
cover marked with a silver dot.
Reattach the three screws to the side of the backplate to
secure the dome cover in place.
8
1E
8 7
STUD SCREW
Feed the aircraft cable through the small holes in the dome
cover from the inside of the cover.
1D
6
6
6
6
AIRCRAFT
CABLE