LBL Lighting Mini-Rock Candy Cylinder - Manual (Page 2)

2
1C
4
5
6
1E
6
6 7
6 9
6 10
Verify that the mounting plate is level before continuing.
Line up an anchor tip with the center of the mounting
plate hole and push the anchor into the wall up to the
threads.
Screw the anchors in the rest of the way.
Repeat steps 4-6 for the other anchor.
ANCHOR ANCHOR
Slide a #8 screw through a washer and screw it into an
anchor. Repeat for the other anchor to secure the
mounting plate to the wall.
SCREW
WASHER
SCREW
WASHER
1D
6 8
SCONCE
Connect the mounting plate ground wire to a suitable
ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut. 6 11
Hook the top of the sconce to the top of the mounting
plate and swing the bottom of the sconce toward the
plate until it is flush with the wall.
Tighten the set screw at the bottom of the sconce to
secure it to the mounting plate.
1F
9
12
10
11
13
6 12
6 13