LBL Lighting Mini-Rock Candy Cylinder Wall - Manual (Page 3)

3
Install the Lamp and Shades
Push the lamp base completely into the socket.
CAUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
LAMP
SOCKET
1
2A
2C
Carefully screw the outer glass shade onto the socket
assembly base until it is firmly in place. 3
SOCKET
ASSEMBLY
BASE
OUTER
GLASS
SHADE
Use Watt Type Quad Tube
G24Q-3 Base Compact Fluorescent Lamp.
MAX 26
2B
Gently push the inner glass shade into the center of the
socket assembly base until it is firmly in place. 2
SOCKET
ASSEMBLY
BASE
INNER
GLASS
SHADE
NOTE: To re-lamp, reverse the section 2 instructions.