Anchor the fixture, Install the lamp and shade, Save these instructions – LBL Lighting Pavia WCF User Manual
Page 2
2
Verify that the fixture is level before continuing.
Line up an anchor tip with the center a mounting plate hole,
and push the anchor into the wall up to the threads.
Screw the anchors in the rest of the way with a Phillips-head
screwdriver.
Repeat steps 2-3 for all 3 anchors.
ANCHOR
Use
Twin Tube
MAX 36
Watt
Compact Fluorescent Lamp.
Slide a #8 screw through a washer and screw it into an anchor.
Repeat for all 3 anchors to secure the fixture base to the wall.
Anchor the Fixture
ANCHOR
WASHER
SCREW
Install the Lamp and Shade
Push the lamp base firmly and completely into the socket
Push the lamp tube onto the retaining clip.
NOTE:
Do not over tighten the thumb screws.
Overtightening may break the glass and result in injury.
Slide the thumb screws into the nylon washers and through
the holes in the shade, and screw them into the nuts on the
mounting plate.
WASHER
THUMB
SCREW
SHADE
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2A
1
2
2
3
3
4
5
2B
5
3A
1
3
3B
3
2
1