LBL Lighting Kett - Manual (Page 3)

1
3
2
3
With a soft cloth, push the new lamp firmly all the way
into the socket.
NOTE:
Use only your fingers and a soft cloth to
replace the lamp.
Use Volt, type T4, G9 base
bi-pin halogen lamp in each socket.
MAX 60 120 Watt
Install the Lamp Install the Fixture
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the screw (reversal of figure 1A
and 1B).
3A
1
2
3
4
1
LAMP
SOCKET
4A