Install the lamp and shade, Install the fixture – LBL Lighting Oliver User Manual
Page 2
2
Install the Lamp and Shade
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
3
3
1C
3
With a soft cloth, push the new lamp firmly all the way
into the socket.
NOTE:
Use only your fingers and a soft cloth to
replace the lamp.
Use
Volt,
type T4, G9 base
bi-pin halogen lamp in each socket.
MAX
60
120
Watt
LAMP
SOCKET
2A
1
2B
GLASS SHADE
SOCKET ASSEMBLY
2
Install the Fixture
4
6
5
3A
1
2
3
4
NOTE:
To replace lamp, reverse section 2.
Install the glass shade by pushing it onto the socket
assembly until it is firmly in place.
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the screw (reversal of figure 1A
and 1B).