LBL Lighting Jada - Manual (Page 2)

2
Assemble the Fixture
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
3
3
1C
3
With a soft cloth, push the new lamp firmly all the way
into the socket.
NOTE:
Use only your fingers and a soft cloth to
replace the lamp.
Use Volt, type T4, G9 base
bi-pin halogen lamp in each socket.
MAX 60 120 Watt
2A
1
LAMP
Install the glass shade by pushing it onto the socket
assembly until it is firmly in place.
GLASS SHADE
2B
2
SOCKET