Install the lamp & shade, Save these instructions, 1d 1c 2a – LBL Lighting Top W User Manual
Page 2
1D
1C
2A
2
Connect the crossbar assembly to a suitable ground in
accordance with local electrical codes.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections properly inside the
electrical box.
Place the fixture canopy onto the crossbar assembly. Level the
fixture vertically; replace and tighten the two #8-32 Phillips
head screws.
#8-32 SCREW
Install the Lamp & Shade
LAMP
SOCKET
Place the glass shade into the socket housing.
SOCKET
HOUSING
GLASS SHADE
Push the lamp pins completely into the socket holes.
NOTE:
Use only your fingers and a soft cloth to install
the lamp.
Use
MAX
220 Volt,
40
Watt Type T4,
G9 Base, Bi-Pin Halogen Lamp.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4
1
1
5
2B
2
2
7
5
6
8
6
4
8
7