LBL Lighting Presidio W - Manual (Page 2)

2
Place all wires and wire nut connections properly inside the
electrical box.
Level the mounting plate vertically and slide the center hole
completely onto the exposed threaded nipple.
Secure the mounting plate to the threaded nipple with lock
washer and nut.
NUT
LOCK
WASHER
EXPOSED
THREADED
NIPPLE
7
1C
5
6
6
7
Install the Lamp and Shade
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Use Watt Type T3 MAX 100
118mm Double End Halogen Lamp.
Place the eccentric washer onto the bottom socket, with the
flat edge of the washer facing the mounting plate.
Note: The washer is not needed if mounting horizontally.
Insert one end of the lamp into the bottom socket and push it
down to compress the spring slightly.
Line up the top of the lamp with the top socket and gently
ECCENTRIC WASHER
SOCKET
LAMP
Push the lamp shield clips onto the sockets.
LAMP SHIELD
1
2A
1
3
2
3
4
2B
2
1
4
4