LBL Lighting Presidio WCF3 - Manual (Page 2)

1C 2A
Place all wires and wire nut connections properly inside the
electrical box.
Level the mounting plate vertically and slide the center hole
completely onto the exposed threaded nipple.
Secure the mounting plate to the threaded nipple with lock
washer and nut.
2
NUT
Install the Lamp & Shade
LAMP
SOCKET
SOCKET
PIN
MOUNTING
PLATE
LOCK
WASHER
THREADED
NIPPLE
For The Fixtures With Magnetic Ballast,
Use
Watt Type Twin Tube MAX 13
GX23 Base Compact Fluorescent Lamp With Each Socket.
Install the lamp by pushing the lamp pins completely into the
socket holes.
For The Fixtures With Electronic Ballast,
Use
Watt Type Quad Tube G24q-1 MAX 13
Base Compact Fluorescent Lamp With Each Socket.
7
1
5
6
1
1
6
7