LBL Lighting Mistral W - Manual (Page 2)

Install the Lamp & Shade
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes, replace and tighten
the thumb screws to secure the glass shade in place.
Use MAX 120 Volt, 100 Watt Type A19
Medium Base Lamp.
Screw the lamp into the socket.
2
SOCKET
LAMP
THUMB SCREW
GLASS
SHADE
NOTE: Do not over tighten the thumb screws which may
cause the glass shade to break.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2A
1
1
2 2
2B
2