Install the lamp & shade, Save these instructions, 2b 2a – LBL Lighting Athena W User Manual
Page 2
2B
2A
NOTE:
Use only your fingers and a soft cloth to install
the lamp.
LAMP
SOCKET
2
From bottom of the mounting plate slide the glass shade up
onto the threaded nipple.
Replace and tighten the cap completely to the exposed
threaded nipple to secure the glass shade in place.
GLASS
SHADE
CAP
CAP
THREADED
NIPPLE
Use
120 Volt,
Watt Type T4,
MAX
60
G9 Base, Bi-Pin Halogen Lamp.
Push the lamp pins completely into the socket holes.
Unscrew and remove the cap from bottom of the mounting
plate.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2
2
1
1
3
4
4
3
Install the Lamp & Shade