Install the lamp & shade, Save these instructions – LBL Lighting Iris WCF3 User Manual
Page 2
Install the Lamp & Shade
2
THUMB
SCREW
GLASS
SHADE
Push the lamp pins completely into the socket holes.
LAMP
SOCKET
LAMP PIN
For The Fixtures With Electronic Ballast,
Use
MAX
13
Watt Type Quad Tube G24q-1
Base 4-PIN Compact Fluorescent Lamp,
With Each Socket.
For The Fixtures With Magnetic Ballast,
Use
MAX
13
Watt Type Quad Tube
GX23-2 Base Compact Fluorescent Lamp,
With Each Socket.
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.
NOTE:
Do not over tighten the thumb screws which may
cause the glass shade to break.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1
2A
1
2
2B
2
2