LBL Lighting Eclipse W - Manual (Page 3)

Install the Lamps & Shade
3
Align the metal shade center hole with the exposed threaded
nipple.
While holding the mounting plate in place, rotate to tighten
the metal shade to the mounting plate.
SOCKET
LAMP
METAL SHADE
EXPOSED
THREADED NIPPLE
NOTE: To replace the lamp:
- Hold the mounting plate and rotate the metal shade
counter clockwise to remove it.
- Remove the old lamp.
- Follow steps 1 through 3 on this page.
Screw the lamps into the sockets.
Use Watt Type A19 MAX 60
Medium Base Lamp With Each Socket
2A 2B
1
2
3
1
2 1 1
3