LBL Lighting Galleria Shield W - Manual (Page 3)

3
Push the glass shade onto the socket housing. Align the glass
shade hole with the socket housing hole secure the glass shade
in place by tightening the thumb screw and the plastic washer.
Install the Glass Shade & Lamp
GLASS SHADE
SOCKET
HOUSING
Align and push the lamp pins completely into the socket holes.
Use the fixture handle to rotate and aim the light.
LAMP
HANDLE
Use Watt MR16 Front Cover MAX 50
Halogen Lamp.
THUMB SCREW
PLASTIC
WASHER
NOTE: To replace the lamp and to avoid breaking the
glass shade it is recommended to remove the glass shade
along with the lamp by unscrewing the thumb screw
and washer.
SOCKET
HOUSING
2A
1
1
2B
2
3
2 3