Install the fixture – LBL Lighting Moon Dance Flush Mount User Manual
Page 2
Advertising
2
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
2A
1
2
3
1
2
3
Install the Fixture
2B
2
4
Properly place all wires and wire nut connections into
the electrical box.
Mount the fixture onto the threaded studs on the
mounting plate and secure it by tightening the two
cap nuts.
MOUNTING PLATE
2
5
3
1C
MOUNTING
PLATE
Mount the mounting plate to the electrical box with
the two #8-32 screws.
#8-32 SCREW
3
#8-32 SCREW
ELECTRICAL BOX
3
STUD
5
5
THUMB NUT
FIXTURE BASE
Advertising