LBL Lighting Vera Flush Mount CF - Manual (Page 2)

2
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white ballast wire to the neutral power line
wire with a wire nut.
Connect the black ballast wire to the hot power line
wire with a wire nut.
2A
1
2
3
1
2 3
Install the Fixture
FIXTURE
2B
2 4 Properly place all wires and wire nut connections into
the electrical box.
Mount the fixture onto the threaded studs on the
mounting plate and secure it by tightening the two
cap nuts.
CAP NUT
5 5
MOUNTING PLATE
2 5
FIXTURE
STUD
3
1C
MOUNTING
PLATE
Mount the mounting plate to the electrical box with
the two #8-32 screws.
#8-32 SCREW
3
#8-32 SCREW
ELECTRICAL BOX
3