LBL Lighting Fiona 18 Flush Mount - Manual (Page 3)

3
3A
Install the Lamps and Diffuser
2 Screw the lamps into the sockets. 1
LAMP SOCKET
Use 120 volt MAX 60 Watt
Type A19 Medium Base Lamp.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: To re-lamp, reverse the section 3 instructions
to remove the diffuser and gain access to the lamps
and sockets.
3B
2
STEEL WASHER
DIFFUSER CAP
PLASTIC WASHER
THREADED NIPPLE
Unscrew the diffuser cap and remove it along with the
washers from the socket assembly.
3C
THREADED NIPPLE
SHADE
PEG
3
STEEL WASHER
DIFFUSER CAP
PLASTIC WASHER
DIFFUSER
Insert the steel washer onto the threaded nipple,
followed by one of the plastic washers.
Insert the glass diffuser onto the nipple and against the
shade pegs, followed by the second plastic washer and
secure it by screwing the diffuser cap back into place.
PLASTIC WASHER
4
4
3
NOTE: Do not over tighten the shade. Over-
tightening may break the glass resulting in injury.