LBL Lighting Fiona 18 Flush Mount CF User Manual
Page 2
Advertising
2
2B
2
2
Mount the mounting plate to the electrical box with
the two #8-32 screws.
MOUNTING
PLATE
ELECTRICAL
BOX
#8-32 SCREW
#8-32 SCREW
2
2
3
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
2C
3
4
5
4
5
2D
2
6
Properly place all wires and wire nut connections into
the electrical box.
Mount the fixture onto the threaded studs on the
mounting plate and secure it by tightening the two
knurled nuts.
KNURLED NUT
STUD
7
7
FIXTURE
MOUNTING PLATE
2
7
Advertising