LBL Lighting Veneto Grande - Manual (Page 2)

1C
2
Connect the fixture green wire to the ground in accordance
with local electrical codes.
Connect the fixture white wire to neutral power line wire with
a wire nut.
Connect the fixture black wire to hot power line wire with a
wire nut.
Place all wire and wire nut connections inside the electrical
box.
Slide the canopy holes completely onto the crossbar threaded
studs.
Tighten the cap nuts completely to the threaded studs to
secure the canopy in place.
THREADED STUD
CAP NUT
CANOPY
Use Volt, Watt Type A19 MAX 100 120
Medium Base Lamp With Each Socket.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
For each socket, screw the lamp completely into the socket.
LAMP SOCKET
6
2A
1D
6
7
8
9
10
11
1
8 7
10
11
11
Install the Lamps & Glass Shade
Place a plastic washer onto the cap screw.
From outside of the glass shade, insert the cap screw through
one glass shade hole.
Place the second plastic washer onto the cap screw and finger
tighten the knurled nut to secure the cap screw in place.
Repeat steps 2 through 5 for the remaining glass shade holes.
KNURLED NUT
PLASTIC WASHER
PLASTIC WASHER
GLASS SHADE
CAP SCREW
2B
1
2
3
4
2
1
4 3