LBL Lighting Veneto Venti - Manual (Page 2)

1C
2
Connect the fixture green wire to the ground in accordance
with local electrical codes.
Connect the fixture white wire to neutral power line wire with
a wire nut.
Connect the fixture black wire to hot power line wire with a
wire nut.
Place all wire and wire nut connections inside the electrical
box.
Slide the canopy holes completely onto the crossbar threaded
studs.
Tighten the cap nuts completely to the threaded studs to
secure the canopy in place.
THREADED STUD
CAP NUT
CANOPY
Install the Lamps
Use Volt, Watt Type A19 MAX 100 120
Medium Base Lamp With Each Socket.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
For each socket, screw the lamp completely into the socket.
LAMP SOCKET
6
2A
1D
6
7
8
9
10
11
1
8 7
10
11
11