LBL Lighting Rania W LED - Manual (Page 2)

2
3
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the brown (black) driver wire to the hot power
line wire with a wire nut.
Connect the blue (white) driver wire to the neutral
power line wire with a wire nut.
Properly place the driver, all wires, and wire nut
connections into the fixture base.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the fixture screws (reversal of
figure 1B).
1
2A
2
1
Attach the mounting plate to the electrical box using
the two #8-32 screws provided. 5
1C
5
#8-32 SCREW
MOUNTING
PLATE
5
1
DRIVER
FIXTURE BASE
1
3A
2
1
BRACKET SCREW
3
Reinstall the lower bracket and secure it in place using a
bracket screw.
Carefully lower the glass shade onto the lower bracket’s
threads and hold in place.
Reinstall the upper bracket and secure it in place using a
bracket screw.
BRACKET SCREW
UPPER
BRACKET
THREAD
LOWER
BRACKET
2
3
2
3
SHADE
4
SAVE THESE INSTRUCTIONS!
1
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
A Generation Brands Company
CAUTION: Do not release glass until both brackets
have been fully secured, the glass may fall and break
resulting in injury.
Install the Shade
Install the Fixture
5