LBL Lighting Lola 2-Light - Manual (Page 2)

2
Install the Lamps
Push the lamp all the way into the socket. Repeat for
remaining socket assemblies.
NOTE: Use only your fingers and a soft cloth to install
Use Volt, type T4, G9 base
MAX 40 120 Watt
bi-pin halogen lamp in each socket.
LAMP
2A
1
3B
2
NOTE: To replace lamp, reverse section 3 and 2.
Carefully install the glass shade by aligning the opening
on the glass shade to the slots on the socket and rotate
downward at an angle that compliments the glass
shade’s curvature until it is firmly in place.
SOCKET
Install the Shades ( )
Rectangular Glass
Install the Shades ( )
Curved Glass
3A
1 Carefully install the glass shade by aligning the opening
on the shade to the slots on the socket and push it
straight down onto the socket until it is firmly in place.
SOCKET
GLASS SHADE
SOCKET
GLASS SHADE
NOTE: The larger shades must be installed on the
right side of the fixture.