Install the lamp, Install the fixture, 3a 4a – LBL Lighting Kett 5-Light User Manual
Page 3
Advertising
1
2
3
3
With a soft cloth, push the new lamp firmly all the way
into the socket.
Repeat for all socket assemblies.
NOTE:
Use only your fingers and a soft cloth to
replace the lamp.
Use
Volt,
type T4, G9 base
bi-pin halogen lamp in each socket.
MAX
60
120
Watt
Install the Lamp
LAMP
SOCKET
Install the Fixture
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the two screws (reversal of figure
1A).
3A
4A
1
2
3
4
1
2
2
Advertising