Save these instructions, 1c 1d – LBL Lighting Windfall User Manual
Page 2
2
1C
1D
6
4
DRIVER
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white (blue) driver wire to the neutral
power line wire with a wire nut.
Connect the black (brown) driver wire to the hot power
line wire with a wire nut.
Properly place the driver, all the wires, and wire nut
connections into the fixture, then mount the fixture by
sliding it back onto the mounting plate and reinstalling
the fixture screws (reversal of figure 1A).
4
5
6
8
For wet locations, caulk around the base with
waterproof construction sealant.
5
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
7