LBL Lighting Henry 18 - Manual (Page 3)

3
Place the driver flat inside the fixture and hook the top
of the fixture to the top of the mounting plate and
swing the bottom of the fixture toward the plate until it
is flush with the wall.
With the allen wrench, tighten the set screws at the
bottom of the fixture to secure it to the mounting plate.
1E
1F
13
14
12
10
11
13
14
15 For wet locations, caulk around the base with
waterproof construction sealant.
1G
DRIVER
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white (blue) driver wire to the neutral
power line wire with a wire nut.
Connect the black (brown) driver wire to the hot power
line wire with a wire nut.
10
11
12