LBL Lighting Aviva 26 - Manual

1
Installation Instructions for
Aviva 26 Wall
980AVI26O
Install the Fixture
G P I : ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product may be dimmed with a low-voltage electronic dimmer.
This product must only be mounted vertically in wet locations.
Remove the fixture screws located on the top and
bottom of the fixture base.
Remove the mounting plate from the fixture base.
1.0
O 787_ D
1
1A
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE SCREW
MOUNTING
PLATE
FIXTURE SCREW
Attach the mounting plate to the electrical box using
the two #8-32 screws provided. 3
1B
2
MOUNTING
PLATE
#8-32 SCREW
3
1
1
Outdoor
3