LBL Lighting Modular Industrial Small - Manual (Page 3)

3
Install the Lamps
Connect the hot power line wire to the black fixture wire with
a wire nut.
Connect the neutral power line wire to the white fixture wire
with a wire nut.
Reinstall the reflector into the housing and tighten all six
screws to hold it in place.
Reinstall the front cover on to the housing and fully tighten all
six cap screws. Tighten all the cap screws evenly to prevent
the cover from flexing, which could cause the glass to break.
Push the lamp bases forward into their sockets.
Use Type Twin Tube T5, MAX 24 Watt
2G11 Base Compact Fluorescent Lamps.
NOTE: To remove the lamp, push the red button.
1F
10
11
2A
12
1
2
10
11