LBL Lighting Modular Industrial Small CF - Manual (Page 3)

3
Install the Lamps
Connect the hot power line wire to the black fixture wire with
a wire nut.
Connect the neutral power line wire to the white fixture wire
with a wire nut.
Reinstall the reflector into the housing and tighten all six
screws to hold it in place.
Screw the lamps into the sockets.
Reinstall the front cover on to the housing and fully tighten all
six cap screws. Tighten all the cap screws evenly to prevent
the cover from flexing, which could cause the glass to break.
Use Volt, Type BT15 MAX 60 120 Watt
Medium Base Lamp.
1F
10
11
2A
12
1
2
10
11