Install the protective cover, Install the decorative shade (optional), 2f 2e – LBL Lighting Omni Small LED User Manual
Page 3: 4a 3a
2F
2E
11
9
10
4A
3A
1
Connect the white wire to the neutral power line wire.
Connect the black wire to the hot power line wire.
Connect the green wire to a suitable ground in accordance
with local electrical codes.
Reinstall the reflector into the housing and tighten all four
screws to hold it in place.
Install the Protective Cover
Reinstall all the cap screws around the perimeter of the cover.
3
Install the Decorative Shade (Optional)
DECORATIVE
COVER
SUPPORT ARM
SUPPORT ARM
ALLEN WRENCH
Use the Allen wrench to remove the upper shade support arm.
Place the shade into the slot in the lower shade support arm.
Line up the slot in the upper shade support arm with the top
of the shade.
Use the Allen wrench to attach the shade support arm to the
top of the fixture.
1
2
3
4
8
10
8
9
11
11
11
11
2
2
2
2
2
2
4
3
2