LBL Lighting Uptown Large - Manual

1
Installation Instructions for
Uptown Large Outdoor
980UPTWNLO
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
GENERAL PRODUCT INFORMATION:
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the base of the fixture.
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
ALLEN WRENCH
SET SCREW
MOUNTING
PLATE
1 3
1.0
Outdoor
1A 1B
2
LW641_LEDW
1
1
3
3