LBL Lighting Nikko CF8 - Manual (Page 2)

2
Remove all the screws from the front of the fixture.
Lift the cover off of the fixture.
Connect the hot power line wire to the black ballast wire with
a wire nut.
Connect the neutral power line wire to the white ballast wire
with a wire nut.
Connect the fixture to a suitable ground according to local
electrical codes.
Reattach the reflector to the fixture base.
SCREW COVER
Remove the screws on the reflector.
Lift the reflector out of the fixture base.
SCREW
FIXTURE BASE
REFLECTOR
Make sure the fixture base is level, and secure it to the nipple
with a lock washer and nut.
WASHER NUT NIPPLE
1E
7
7
1F
8
8
9
10
11
9
1D
1C
3
4
5
7
3
3
3 3
5
5
6