Save these instructions, 1f 1c – LBL Lighting Polo User Manual
Page 2
1F
1C
4
2
Place the cover onto the fixture base and screw in the three
screws provided to secure the cover.
COVER
Place the glass shield inside the plastic cover.
GLASS SHIELD
PLASTIC
COVER
Slip the hole in the center of the fixture base onto the nipple.
Make sure the fixture is level, and secure the fixture to the
nipple with a nut.
Connect the white fixture wire to the neutral power line wire
with a wire nut.
Connect the black fixture wire to the hot power line wire
with a wire nut.
FIXTURE BASE
NUT
SCREW
Screw the lamp into the socket.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Use
Type G16.5
MAX 40 Watt
E12 Base Lamp.
WIRE NUT
5
6
7
1D
8
1E
10
9
10
8
5
6
7
10
10
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
A Generation Brands Company