LBL Lighting Presidio Wet User Manual
Presidio, Install the fixture
Installation Instructions for
Presidio
1.0
HW614_100_W
980PRESIWW
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Install the Fixture
While holding the glass shield, unscrew and remove the two
#8-32 screws, the glass shield bracket and glass shield from the
mounting plate.
#8-32 SCREW
GLASS SHIELD BRACKET
GLASS SHIELD
MOUNTING PLATE
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
CROSSBAR
ASSEMBLY
ELECTRICAL BOX HOLE
#8-32 SCREW
Outdoor
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1B
1
1
2
2
1
2