Install the fixture – LBL Lighting Eclipse User Manual
Page 2
Advertising
Place all wires and wire nut connections properly inside the
electrical box.
Place the large portion of the key holes onto the exposed
#8-32 screws.
2
#8-32 SCREW
Rotate the mounting plate so that the #8-32 screw heads are
locked into the small portion of the key holes.
Thread
the two provided #8-32 screws
into the electrical box holes, leaving 1/8" of them exposed.
(Not Completely)
ELECTRICAL BOX HOLE
#8-32 SCREW
1/8"
In accordance with local electrical codes, make sure that the
fixture is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
MOUNTING
PLATE
Install the Fixture
KEY HOLE
2A
1
1
2B
1
2
1
3
1
4
2C
1
5
1
6
1
7
2D
1
4
3
5
7
7
Advertising