Install the fixture 3 – LBL Lighting Visir 20 User Manual
Page 2
Advertising
3
2
2E
4
Install the Fixture
3
9
8
2C
5
FIXTURE BASE
Feed the fixture power lines through the hole in the fixture
base.
Then feed the fixtures power lines through the nipple on the
crossbar assembly .
10
Ground the crossbar in accordance with local electrical
codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
8
9
10
3
2B
FIXTURE BASE
Feed the fixture power lines first through the provided nut,
then through the provided lock washer.
WASHER
NUT
5
2D
#8-32 SCREW
CROSSBAR
ASSEMBLY
Secure the crossbar assembly to the electrical box using two
#8-32 screws provided.
Pull the fixture power lines out of the electrical box.
2
6
2
7
4
6
6
7
Advertising