LBL Lighting Visir 30 User Manual
Page 2
Advertising
3
2
2E
4
3
9
2C
4
FIXTURE BASE
Feed the fixture power lines through the hole in the fixture
base.
Then feed the fixtures power lines through the nipple on the
crossbar assembly .
Ground the crossbar in accordance with local electrical
codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
8
9
10
3
2B
Feed the fixture power lines first through the provided nut,
then through the provided lock washer.
5
#8-32 SCREW
CROSSBAR
ASSEMBLY
Secure the crossbar assembly to the electrical box using two
#8-32 screws provided.
Pull the fixture power lines out of the electrical box.
2
6
2
7
WASHER
NUT
FIXTURE BASE
4
8
10
2D
6
6
7
4
5
Advertising