Save these instructions – LBL Lighting 2-Circuit MO Rail User Manual
Page 2
2
Connect the 2-Circuit Monorail
Sections
Push the 2-Circuit Monorail sections completely onto the
conductive or isolating connectors.
Tighten the M3 set screws with the 1.5 MM Allen wrench.
Make sure that the set screw connection for conductive
connector is tight to avoid heat build up and corrosion. For the
isolating connector, tighten the M3 set screw firmly to avoid
stripping the thread.
CONDUCTIVE OR ISOLATING JOIN CONNECTORS
2-CIRCUIT
MONORAIL
SAVE THESE INSTRUCTIONS!
1.5 MM ALLEN
WRENCH
M3 SET SCREW
2A
1
2
1
2
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company