LBL Lighting FSJ Recessed Can Adapter 6" LED - Manual (Page 4)

4
Bend the "C" shaped hooks slightly down to avoid cross
threading the long #10-24 screws that hold the canopy.
Lay one threaded hole bracket on top of the "C" shaped hook
so that the curved section of the bracket is in contact with the
inside can wall.
Similarly, from the bottom of the "C" shaped hook, hold the
clearance hole bracket. Line the two bracket holes up and
screw them together with the two short #8-32 screws so that
these brackets clamp the "C" shaped hooks.
Repeat steps 2 through 4 for the other "C" shaped hooks.
LONG #10-24
SCREWS
CANOPY
CLEARANCE
HOLE BRACKET
Screw the long #10-24 screws into the center hole of
brackets.
Screw the Fusion Jack fixture connector into the Fusion Jack
port connector.
Turn the power on.
FUSION JACK FIXTURE
CONNECTOR
FUSION JACK PORT
CONNECTOR
THREADED HOLE
BRACKET
SHORT #8-32
SCREWS
"C" SHAPED
HOOKS
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4B
2
4C
3
6
7
3
5
4
5
4
2
8
7
6 6
4D