LBL Lighting LED Illum MO Flush Elec Xfmr 60w 277v/12v LED - Manual (Page 2)

2
Feed the coaxial cable up and into the canopy post.
Slide the metal sleeve up into the canopy post and secure by
tightening the M4 set screw with the provided 2MM Allen
wrench.
For dual power feed canopies: Repeat steps 1-7 for the second
power feed cable.
2MM ALLEN
WRENCH
M4 SET SCREW
CANOPY POST
METAL SLEEVE
COAXIAL CABLE
Strip the last 4” of the coaxial outer mesh to expose the inner
insulated wire.
Slide the metal sleeve down the wire to the edge of the coaxial
cable.
INNER WIRE
COAXIAL CABLE
4”
METAL SLEEVE
1A 1B
4
3
1A 1C
6
5
7
5
6
3
4