LBL Lighting MO Surf Mag Xfmr 300w 277v/12v - Manual (Page 3)

3
SAFETY WIRE
Install the Transformer
3
4
3A
3B
CROSSBAR
BRACKET
1
2
Properly place all wires and wire nut connections into the
transformer housing.
Slide the vertical portion of the housing "L" slots completely
onto the three backplate #8-32 flat head screws.
Rotate the transformer housing clockwise to lock the housing
slots around the #8-32 flat head screws.
Tighten the three #8-32 flat head screws with the 3/32 Allen
wrench to secure the transformer in place.
#8-32 FLAT
HEAD SCREW
3/32 ALLEN
WRENCH
HOUSING 8 7
6
5
6
7
8
Hook the transformer safety wire onto the crossbar bracket.
Connect the crossbar green wire to the ground in accordance
with local electrical codes.
Connect the white transformer wire to the neutral power line
with a wire nut.
Connect the black transformer wire to the hot power line
wire with a wire nut.
4
2
3
1
Connecting the Center Power Feed
Connector to the MonoRail
4A
4
5
1
2
3
Connect the Monorail to the standoffs so that the Monorail is
secured in place. Refer to the instruction provided with the
standoff.
Make sure that the transformer power is off.
Place the power feed housing onto the Monorail.
Completely back out the screw on the power feed cap.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
Tighten the screw on the power feed cap for proper power
connection.
MONORAIL
POWER FEED
HOUSING
POWER
FEED CAP
SCREW
4B
6
3
5
4 6