LBL Lighting MO Rmt Elec Xfmr 300w 120v/12v DC - Manual (Page 4)

4
SAVE THESE INSTRUCTIONS!
TRANSFORMER
COVER
PHILLIPS SCREW
1D
Connect the 120 volt power line wires at the panel.
Replace the transformer cover and tighten the four
Phillips screws.
After installing the entire system, operate the system for
five minutes. On the low voltage side, all electrical
connection points should be no more than warm to the
touch. If a connection is hot to the touch, retighten the
connection and check to ensure that the temperature
decreases.
12
13
14 14
14
14
14
12
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.encompasslighting.com
© 2008 Encompass Lighting Group. All rights reserved. The "Encompass Lighting Group"
graphic is a registered trademark of Encompass Lighting Group. Encompass Lighting Group
reserves the right to change specifications for product improvements without notification.
A Generation Brands Company