LBL Lighting MO T Conductive Connectors User Manual
Install the conductive connectors, T conductive connectors, Save these instructions
1
G
P
I
:
ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
Installation Instructions for
T Conductive Connectors
950MOTCC
MONORAIL
Tighten all the set screws with the Allen wrench provided.
Make sure all set screw connections are tight for a proper
power connection and to prevent heat build up.
ALLEN WRENCH
SET SCREW
Push the three Monorail sections completely onto the two
T conductive connectors
MONORAIL
SECTION
CONDUCTIVE
CONNECTOR
MONORAIL
SECTION
MONORAIL
SECTION
Install the Conductive Connectors
1.0
1.0
1.1
1A
1A
1A
1B
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.generation-brands.com
© 2012 Generation Brands.All rights reserved.The "Genereation Brands"
graphic is a registered trademark of Generation Brands. Generation Brands
reserves the right to change specifications for product improvements without
notification.
A Generation Brands Company
1
2
1
1
1
2