LBL Lighting T-Grid Clip - Manual (Page 2)

2
SUPPORT POST
STANDOFF ROD
2 MM ALLEN
WRENCH
M4 SET SCREW
Push the standoff rod completely into the support post and
tighten the M4 set screw with the 2 MM Allen wrench.
Refer to the instruction provided with the standoff to
complete the installation.
Install the Adjustable Cable Standoff
Screw the cable post completely to the threaded nipple.
Refer to the instruction provided with the standoff to
complete the instruction.
CABLE POST
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company A Generation Brands Company
1A 2C
3
4
3
1A 3A
1
2
1