3. 014a mounted on a crossarm with pn 1049, 4. cm220 right angle mounting bracket, Figure 4-3) – Campbell Scientific 014A Met One Wind Speed Sensor User Manual
Page 12: Figure 4-4)
Advertising
Met One 014A Wind Speed Sensor
5. Route the sensor cable along the underside of the crossarm to the
tripod/tower, and to the instrument enclosure.
6. Secure the cable to the crossarm and tripod/tower using cable ties.
FIGURE 4-3. 014A mounted on a crossarm with pn 1049
FIGURE 4-4. CM220 Right Angle Mounting Bracket
Crossarm
Sensor Base
1049 NU-RAIL
U-bolt holds
sensor base
CM220 Mounting
Bracket
Crossarm
4
Advertising