Programming – Campbell Scientific CD294 DataView Dual Line Data Display User Manual

Page 6

Advertising
background image

DataView (CD294) Dual Line Data Display

Windows 95 / 98/ 2000
1. Insert the PC294 CD into the CD drive.
2. From the Start menu select ‘Run’.
3. Type N:\setup (where N is the CD drive).
4. Click OK.
5. Follow the installation instructions as they are presented.

In either of the above installations, PC294W will create a program group and
all the necessary files will be installed. In addition to the program files there
will be a sample LCD file called TEST.LCD and a download file called
TEST.DLD. These files can be used to modify and send to the DataView.

4. Programming

The DataView is programmed using PC294W, a windows based program
which guides the user though the programming process.

The program has the following limitations:

• Only the first 255 input locations can be sent to the DataView

• The DataView can be configured to display up to 18 locations.

For help on the function of any of the buttons, simply leave the mouse
positioned over a button for a short period of time and an extended message
will appear.

The program briefly displays a splash screen that displays information about
the program, including the License details and the version number.

FIGURE 1. Splash Screen

2

Advertising