Campbell Scientific CM375 Portable 10-Meter Mast - Manual (Page 11)

CM375 Portable 10-Meter Mast
Step 2: Place Section 1 at deployment location with base oriented, as shown in
FIGURE 3-4 and mast pointing NORTH.
A compass is included in the optional “Tensioning Kit” for your
use. NOTE
NORTH
FIGURE 3-4. Mast Section 1 oriented on base
Step 3: Use spikes provided (3 each) to anchor base to site (see FIGURE 3-5).
Always maintain a safe distance between the mast and
any overhead power lines. Contact local utilities prior
to assembling the mast to locate any buried utility
lines in the area the mast is to be installed. WARNING
5