Campbell Scientific CM375 Portable 10-Meter Mast - Manual (Page 18)

CM375 Portable 10-Meter Mast
Step 15: Remove the hardware from Section 6. Insert Section 6 into the top of
Section 5 and secure with hardware (FIGURE 3-17).
FIGURE 3-17. Mast Section 6
3.3 Lightning Rod Assembly and Mounting Instrumentation
Step 1: Fit lightning rod assembly (from pn 21660) to top of Section 6 mast
(see FIGURE 3-18).
FIGURE 3-18. Lightning rod assembly
Step 2: Place clamp onto top of mast Section 6 and tighten (see FIGURE
3-19).
Step 3: Insert rod into clamp and tighten (see FIGURE 3-19).
12