Campbell Scientific CRS451/CRS456 Submersible Water-Level Recording Sensor - Manual (Page 14)

CRS451/CRS456 Submersible Water-Level Recording Sensor
7. Programming
Communicating with the CRS451/CRS456 requires a micro USB cable and
HydroSci software running on a computer with Windows XP or later.
The CRS451/CRS456 is configured using the HydroSci software provided with
the unit. A DVD containing HydroSci is shipped with the CRS451/CRS456.
If you are using an XP computer, please have the driver disc
in the CD/DVD drive before plugging in the USB cord. A
driver will need to be installed before the computer can
connect with the sensor.
7.1 Settings
Before connecting to the CRS451/CR456, you can change the sensor name or
the appearance of HydroSci screens by clicking on Settings at the upper right
portion of the HydroSci screen.
7.2 Connect to the CRS451/CR456
1. Select CRS45X from the left margin.
2. Select appropriate COM Port.
3. Click Connect button.
CAUTION
8