Campbell Scientific ID-2000W Software - Manual (Page 60)

SECTION 6. IMPORT/EXPORT
6-6
FIGURE 6-4. Select Export Type and File Name
FIGURE 6-5. Export Data Selection
You may export all or only a portion of an ID-
2000 Windows data file. After selecting the
data file to export, the export file format, and the
export file name the Export Data Selection
dialog box is displayed as shown in Figure 6-5.
The parameter list on the left is used to select
the parameters you wish to include in the
export. The default is all of the parameters are
exported. You may use the “All” and “None” to
quickly select or de-select all of the parameters
or you may individually click on a parameter to
turn it on/off. You may also check the
“Alphabetical Sort” box if you prefer to list the
parameters in alphabetical order.
The Data Subset group in the upper right is
used to specify a subset of the entire file. The
Time Start and Time Stop default to the
beginning and ending of the file which will
export all the data for each selected parameter.
Figure 6-3 shows these fields with values of 0.
and 4.49 which represent the entire length of
the data file being exported. If you only wanted
to export data between 1.0 and 2.0 seconds you
would simply edit the Time Start field and Time
Stop field to show 1.0 and 2.0 respectively.
The Time Data group is only available for ASCII
Column exports and is not applicable to ID-2000
Windows or DADiSP exports. For ASCII
Column exports you may optionally include time